Home About Us Showcase Quotations Customer Service
What's New Contact US Wagner Steering Distributors Downloads

Rudder Angle Indicators - Pre-wired and ready to go!
If you have hydraulic steering, your ship’s steering wheel will not indicate your rudder position. Wagner rudder angle indicators show the position of your rudder continuously and accurately, and, if required, from multiple stations. Wagner rudder angle indicators have easy to read calibration and pointers set against a matte black background. Red and green arcs clearly identify port and starboard rudder angles. The pointer moves with the rudder and shows the precise rudder angle on the indicator.

201JB Junction Box
Model 150 Rudder Angle Indicator
201JB Junction Box
Model 150 Rudder Angle Indicator

Model 150 Rudder Angle Indicator
This 3 in. diameter indicator is enclosed in a standard SAE housing for flush mount in consoles or pedestals. The front face of the indicator is completely watertight. The indicator draws less current than a pilot light and may be run off any boat’s 12 to 40 volt DC current supply. Up to six stations may be used by simply connecting them in series. The indicator is fitted with internal, indirect illumination. An optional remote dimmer control allows for selection of a comfortable level of brightness. The indicator comes complete with a pre-wired cable, ready for installation.

  Model 150 Optional Mounting

150 Optional Mountings
The Flush mount Bezel makes dashboard or console mounting of the 150 indicator easy and professional in appearance. A seal is included to permit watertight installation of the indicator into the bezel. It may also be used for installing other gauges supplied in standard size SAE housings to create uniform instrument groupings. The Waterproof Mount combines the Flush Mount Bezel with a housing to form a durable, watertight enclosure suitable for protecting the 150 indicator when installed outside. This mount can also be used for bulkhead mounting of the indicator if required.

Model 150 Optional Mounting
Model 202 Rudder Angle Indicator  
Model 202 Rudder Angle Indicator

Model 202 Rudder Angle Indicator
This rugged, high quality indicator is supplied with flush mounting hardware and comes complete with a pre-wired cable ready for installation. The 4 in. diameter, 3-colour scale provides accurate and highly visible readings. An integral dimmer control with full adjustment of the red coloured, indirect internal illumination permits the operator to select a comfortable level of brightness. The indicator is also available with reverse scales for aft-facing steering positions, or with special scales for custom applications.

  Model 201JB Junction Box

Model 2O1JB Junction Box
This unit contains the circuitry for operating up to eight Model 202 indicators. Wide range voltage regulation permits system operation from any 10 to 40 VDC power supply. This ensures that supply voltage variations will not affect indicator accuracy. The circuitry includes system protection against polarity reversals and voltage surges. The unit is also available with an optional power supply failure circuit, as required by some regulatory authorities. If the supply voltage is interrupted, all indicator pointers are driven off-scale where they are screened from view and held there until the power supply is restored.

Model 201JB Junction Box
Model 203 Rudder Angle Indicator  
Model 203 Rudder Angle Indicator

Model 203 Rudder Angle Indicator
The model 203 Panorama overhead indicator is used where visibility from any position in the wheelhouse is required. Three large scales, each 8 inches (200mm) long, ensure accurate readings at a distance. The indicator includes an integral dimmer control for full adjustment of the red coloured, indirect internal illumination. A power supply failure circuit (as described under Model 201JB Junction Box) is included. The 203 Indicator can be used with the addition of a Universal or 302 Follow-up unit to form a complete system. It can be installed as an extra station in a Model 202 system.

  Universal Rudder Follow-Up

Universal Rudder Follow-up
This completely watertight transmitter contains an infinite resolution sensing device rated for 20 million operations, providing extra long life, even under high vibration conditions. The slightest movement of the rudder generates an electrical signal which causes an accurate proportional movement of the indicator(s). This unit is mechanically linked to the rudder stock. It comes complete with a pre-wired cable, a brass linkage rod and a set of swivels.

Universal Rudder Follow-up
Model 302 Rudder Follow-Up  
Model 302 Rudder Follow-up

Model 302 Rudder Follow-up
This unit is a heavy duty alternative to the Universal Follow-up. The watertight aluminum housing is finished with baked epoxy paint. Two sensing devices can be filled if required, permitting autopilot as well as rudder indicator feedback from the one follow-up unit. This unit can also be oil filled to provide condensation protection.

  Universal Rudder Stock Clamp

Universal Rudder Stock Clamp
This brass clamp fits rudder stocks up to 4 inches (115mm) maximum diameter. The lever of a rudder follow-up unit is mechanically linked to this clamp to provide rudder feedback to an indicator system. A series of connection points are pre-drilled in the clamp arm for various rudder angles.

For more information on our Rudder Angle Indicators, we encourage you to request a quotation or contact us.

Universal Rudder Stock Clamp